When you own a vehicle, the towing potential is naturally smaller than if you own a tractor. The first thing to know is your vehicle’s towing capacity. This information is in the owner’s manual. Most cars can safely tow around 3,000 pounds while some trucks are built tow up to 30,000 pounds! The second thing you need to know is how much weight tow. When you don’t know the precise weight, consider measuring it and see if the car manufacturer’s overall weight falls under the requirements. When you can’t accurately guess that, find some support and tow the load to a meter to get the precise weight.
It is important to remember that a number of different elements involve safe towing: not only does your vehicle need to get the load to a safe speed, but it also needs to be able to control that weight. When towing a load, brakes are just as important as engine horsepower and torque because if you can’t safely stop the vehicle, you shouldn’t be towing that heavy load. You need to evaluate your car or truck ‘s current brake system condition. Was brakes properly maintained? When was your last brake fluid changed? When towing, the last thing you want is a brake system failure. You also need to think about where you’re driving. Can you walk up or down hills? How windy are you expecting? Is the ground dry or wet? How much traffic do you need to safely hit your destination? For your safety, what you’re towing, and everyone else on the road, all these questions should be considered and answered before you ever hit your vehicle.
For vehicles, towing setups are pretty easy, as you can’t tow too much weight. You’ll need a trailer hitch called a trailer hitch receiver, a trailer ball mount, and a trailer hitch ball. Hitch balls come in three sizes: 1-7/8, “2” and 2-5/16 “A 2” ball with a 1 “diameter shank is the most popular type used for towing small to medium sized vehicles. But, double test the type of the ball you use for towing to be sure that the balls shank fits snugly in the ball brace you are using.
For trucks, there are far more towing accessories to choose from. In this article, I’ll only cover the most common types used today. Some trucks have trailer hitches built into their rear bumper, others have a normal trailer hitch installed from the factory on them, and others will lack a trailer hitch all together.
So, you bought the boat, camper, trailer, dirt bike, jet ski, mobile snow, or a bunch of horses, and you’ve got the trailer to go with. Now you need to hit this all to the rig you ‘re driving. What-what to do?!
I think it’s crucial to recognize your current towing needs and potential towing needs while selecting a trailer hitch. You can only tie up a bike rack or carrier this year, but next year you hope it transforms into a camper or yacht. If you have a thought or question about it, selecting the higher class is always a good idea. You do ought to incorporate the towing vehicle into the mix, because not all cars can pull either truck or hook. Good idea to test the owner’s truck or SUV manual and see what it suggests as Towing Ability.
There are 5 Truck Hitches groups for specific towing needs:
- CLASS I Hitch is designed to hold 2,000 pounds of gross trailer weight, 200 pounds of tongue. This is the lightest hitch type used on a small car , truck, or minivan. They are typically used tow pop-up campers, dirt bikes, jet skis, or small aluminum fishing boat. This fit well now with the current hook attached cycle and cargo racks.
- The CLASS II Hitch will carry up to 3,500 pounds, max 350 pounds in the tongue. They fit well connected to bikes, buses, mini-vans and cross-over. They ‘re great to pull a regular size fishing or power boat, a small camper, multiple snow mobiles or jet skis or motorcycles, etc.
- To drive up to 5,000 pounds of gross vehicle weight and 500 pounds of tongue weight, the CLASS III Hop. They are great for pulling a Full Size Pickup, Truck, SUV, or Bus and towing a good camper, truck, or horse trailer. This size hitch is normally built specifically for your car.
- CLASS IV Hitch jumps up to 10,000 pounds and can handle 1,000 to 1,200 pounds in tongue. Such hitches are often designed exclusively for your truck, which would be any sort of full-size sedan, van, or utility vehicle. They ‘re great pulling that bigger camper or boat.
- CLASS V Hitch is designed for extra heavy loads over 10,000 pounds and 1,200 pounds tongue weight. These are “weight distribution” hitches, built for your rig and suitable for towing a car or horse trailer, extra large boat, or camping trailer. Like Class IV Hitch, you’ll want to drive a full-size truck, van, or SUV. The weight distribution system adds spring bars to each side of the trailer, redistributing weight to improve your vehicle’s stability while towing large loads.
- Large boats, campers, trailers and horse trailers also have 5th Wheel and Gooseneck Hitches. They ‘re mounted in your heavy duty truck’s bed.
There are a range of luxury hitch producers out there, including Reese, Curt, Valley, Putnam, among others, producing high-quality receiver hits among appliances. The hitches themselves are high-strength steel and are inspected to ensure they meet appropriate standards. That’s important, so you can be sure your trailer will carry what it’s supposed to! You will all connect up with cable packs, ball brackets, truck sticks, hitch connectors, draw lines, hitch frames, towing gates, keys, and loads of other towing materials.